EasyManua.ls Logo

Build Worker BG2000 - Part 7 Troubleshooting; Troubleshooting Guide

Build Worker BG2000
75 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
- 17 -
PART 7 TROUBLESHOOTING
Engine can't
start
No power
generated
Remedy
The speed and force to pull the
recoil starter is not enough
Put the main switch to "on" position
Adjust the feet of socket
Cause
Fuel oil is not enough
The switch is not at "on" position
Lube oil is not enough
The rated speed of generator can
not be reached
Main switch is not closed
The contract of socket is not good.
Spark plug has carbon sediment
Refuel
Turn it to "on" position
Check and fill in lube oil to
proper level
Start the engine according to
requirement of proper starting
Dismantle,check and clean spark
plug.
Adjust it according to the
requirements.