EasyManua.ls Logo

bumpboxx Slapstik - Page 2

bumpboxx Slapstik
2 pages
Print Icon
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
BATTERY AND POWER
1. The Bumpboxx Slapstik features a rechargeable battery.
2. Charge your battery using the included Type-C charging
cable and the included 5v 1a USB Wall Charger.
3. LED indicator light will light up red while charging and then
turn off once fully charged.
4. Full charge cycle takes 4 to 6 hours.
5. Full battery could be used for up to 12 hours: 2-4 hours at
100% volume with LEDs on, 5-7 hours at 75% volume with
LEDs Off, 7-9 at 50% volume with LEDs off and 10-12 hours
at 20% volume with LEDs Off.
6. Please charge the battery for 4 to 6 hours before using it for
the first time.
BLUETOOTH CONNECTION
1. Once powered on, the Bumpboxx Slapstik will start in
bluetooth mode and ready for pairing with a mobile device.
2. Scan for "Slapstik" on your mobile device.
3. Pair via bluetooth.
4. Once paired, the volume and tracks can be controlled by both
the Slapstik's control panel (tap for volume control and hold for
track control) or by the paired mobile device.
MODE CONTROL
1. LED Control - Double tap power button to scan through
5 different LED modes.
2. Bluetooth - Connect a wireless device to play music via
bluetooth. (See Bluetooth Connection section for instructions)
3. TWS Mode - Link 2 Bumpboxx Slapstik devices for a
True Wireless Stereo experience.
(See TWS Pairing section for instructions)
ACCESSORIES
Speaker Power; 15W x 2
LED Mode: 5 Settings
Battery Life: Up To 12 Hours
Recharge Time: 4-6 Hours
Charging: Type-C 5v 1a Charger
Rechargeable Battery: 3.7v 3300mAh
Dimensions: 7.83" x 3.15" x 1.85"
Speakers: 2 Full-Range 2” Drivers
Peak Power: 30W
Strong Neodymium Anti-Slip Magnetic
Backing to Slapstik
TWS Pairing Capabilities
Bluetooth Version: 5.3
Bluetooth Range: Up To 30 Feet
Type-C Charging Cable x1 5v 1a USB Wall Plug x1 User Manual x1
CAREFULLY READ THIS OPERATING MANUAL TO USE
AND ENJOY THIS UNIT PROPERLY.
KEEP THIS MANUAL FOR FURTHER REFERENCE.
PANEL FUNCTIONS
FUNCTION DESCRIPTION
SPECiFiCATiONS
1. Power/LED Mode/TWS - Hold to power on/off, double tap for LED Mode control/triple tap for TWS Mode
2. + Volume Up/Next Track - Tap to increase volume or hold to skip to the next track
3. - Volume Down/Previous Track - Tap to decrease volume or hold to go to the previous track
4. LED Indicator Light
5. Type-C 5v 1a Charging Port
6. Built-In Microphone
7. LED Light Bar
5
1
2
3
7
4
6

Related product manuals