Bunn Crescendo Series - Strength Adjustment

15
CREATING A “CUSTOM” BEVERAGE
Strength Adjustment
The sub-menus for strength adjustment are located under this option.
• Set the toggle switch to
Program mode.
STEP 1
• Advance to the STRENGTH
ADJUST screen.
STEP 2
PROGRAM MODE
PRESS TO ENTER
• Press SELECT.
STEP 3
1. SELECT SIZE
Use to Navigate
STRENGTH ADJUST
EXIT YES
1. SELECT SIZE
Use to Select
• Sets the grinder run time for
a small espresso shot. This
setting is the same as the one
found in recipe setup.
• Navigate to the next setting.
STEP 4
SM ESP GRIND TIME
(-) #.# sec (+)
1. SELECT SIZE
Use to
Navigate
Use to
decrease
Use to
increase
• Press a dispense switch to
perform a catch test for a
small grind.
• Navigate to the next setting.
STEP 5
1. SELECT SIZE
Use to
Navigate
• Sets the grinder run time for
a large espresso shot. This
setting is the same as the one
found in recipe setup.
• Navigate to the next setting.
STEP 6
1. SELECT SIZE
Use to
Navigate
Use to
decrease
Use to
increase
TEST SM GRIND TM
PRESS DISPENSE
STEP 7
1. SELECT SIZE
Use to
Navigate
Use to
decrease
Use to
increase
LG ESP GRIND TIME
(-) #.# sec (+)
TEST LG GRIND TM
PRESS DISPENSE
• Press a dispense switch to
perform a catch test for a
large grind.
042319