22
SELECT MODE
RINSE CLEAN
042319
CLEANING - continued
RINSE CYCLE (Required Daily)
1. Open the door and place the NORMAL/PROGRAM/RINSE
switch in the RINSE position.
2. Close door and place a minimum 400ml container under the
dispense nozzles.
3. Press the button under RINSE on the screen.
4. Press any beverage selection button.
5. The dispenser will automatically run hot water through
both soluble mixing chambers, and flush the espresso
brew chamber with hot water.
6. After rinse cycle is complete, discard the rinse water
collected in the container.
7. Open the dispenser door, and place the NORMAL/PROGRAM/
RINSE switch in the NORMAL position.
To Next Page
Loading...
