24
SELECT MODE
RINSE CLEAN
CLEANING CYCLE
IN PROGRESS
PRESS DISPENSE
TO START
PRESS ANY BUTTON
TO STOP
042319
CLEANING - CLEAN CYCLE continued
4. Close dispenser door and place a minimum 500ml container
under the dispense nozzles.
5. Press the button under NEXT.
6. When screen displays PRESS DISPENSE TO START, press any
beverage dispense button to begin cleaning cycle.
7. During the cleaning cycle, the screen with display CLEANING
CYCLE IN PROGRESS/PRESS TO STOP.
8. When the cleaning cycle is complete, screen will display
SELECT MODE/ RINSE__ CLEAN.
9. Discard the waste water collected from the cleaning cycle.
10. Open the dispenser door, and place the NORMAL/PROGRAM/
RINSE switch in the NORMAL position.
To Next Page
Loading...
