Bunn Crescendo - Touchless Operation Settings

14
1. SELECT SIZE
ACCESSING AND MODIFYING MACHINE SETTINGS
• The screen will display the
software version.
• Use the hidden switch to view
app version, bootloader, PCAP,
configuration, power setting
and serial number.
APPLICATION SW
VERSION 00.##
STEP 3
Use to
Navigate
Use to view additional
information.
OPERATING CONTROLS AND INTERFACE
• Set the toggle switch to
Program mode.
STEP 1
• Advance to the SM ESP GRIND
TIME screen.
STEP 2
1. SELECT SIZE
Use to Navigate
NORMAL
PRGM
RINSE
PROGRAM MODE
PRESS TO ENTER
• Selecting YES will display
statistics for the machine.
• Navigate to the next setting.
STEP 4
1. SELECT SIZE
STATISTICS
EXIT YES
Use to
Navigate
Use to
select
• This is the minimum temperature
required to dispense a beverage
(soluble tank).
• Navigate to the next setting.
STEP 7
1. SELECT SIZE
READY TEMP ##
(-) EXIT (+)
Use to
Navigate
Use to
decrease
Use to
increase
1. SELECT SIZE
• Displays the current temperatures
for the tanks.
• Navigate to the next setting.
ESPR TANK: ##
PWDR TANK: ##
STEP 5
Use to
Navigate
1. SELECT SIZE
• This the minimum temperature
required to dispense a beverage
(espresso tank).
• Navigate to the next setting.
STEP 9
• The heater control target
temperature for the
espresso tank.
• Navigate to the next setting.
STEP 8
1. SELECT SIZE
ESPRSO READY ##
(-) EXIT (+)
ESPRSO TEMP ###
(-) EXIT (+)
• The heater control target
temperature for the
soluble tank.
• Navigate to the next setting.
STEP 6
1. SELECT SIZE
TANK TEMP ##
(-) EXIT (+)
Use to
Navigate
Use to
decrease
Use to
increase
Use to
Navigate
Use to
decrease
Use to
increase
Use to
Navigate
Use to
decrease
Use to
increase
The following will guide you through each top-level setting found in programming.
continued >