4
PROGRAMMING SWITCHES
Using the menu-driven display (MAIN SCREEN) on the front of dispenser, the operator has the ability to
alter or modify various functions of the dispenser. This allows for precise dispensing of various flavors of
powdered products.
Programming of dispenser is achieved by entering a certain function, then, by use of programming
switches, the operator can customize the dispensing process to their specifications.
To access the programming mode, and to scroll through different function screens, the programming
switches shown are used. There are five switches that will be used for setup of the dispenser.
PROGRAMMING THE DISPENSER
NORMAL
PRGM
RINSE
Service Key
Figure 2
The dispenser is equipped with a door interlock safety switch,
which prevents the operator from being exposed to the moving
parts of the espresso brewer if the door is open.
The switch may be overridden by a qualified service technician
by inserting the service key, (BUNN PN 51953.0001) into the
opening of the mixing chamber panel, then turn about 15
degrees to position, as shown in Figure 2.
DOOR SAFETY INTERLOCK
The following function screens are in order of appearance. Each screen will have instructions on how to
access, and the procedures to program the various functions of the dispenser. To enable programming,
place the “NORMAL/PROGRAM/RINSE” switch in the “PROGRAM” position.
IMPORTANT PROGRAMMING NOTES
- READ CAREFULLY -
To exit the programming mode at any time, press and release the exit (center) pad located on the front
switch panel. The display will return to the PROGRAM HOME SCREEN.
If none of the five programming switches are pressed within a time period during the setup of the dispenser,
the programming of the function screen that is being set will be exited and the display will return to the
PROGRAM HOME SCREEN.
NORMAL/PROGRAM/RINSE Switch:
NORMAL: Allows all dispenser functions. Must be in this position for
dispensing.
PROGRAM: Allows access to program menus using touch pad and
LCD screen.
RINSE: Pressing dispense button on front door will dispense dilution
water and power whipper motor for ten seconds.