Bunn Crescendo - Recipe Setup

9
OPERATING CONTROLS AND INTERFACE
CREATING A “CUSTOM” BEVERAGE (continued)
►
Recipe Setup
The sub-menus for adjusting recipes are located under this option.
• Set the toggle switch to
Program mode.
STEP 1
• Advance to the RECIPE
SETUP screen.
STEP 2
• Press SELECT.
STEP 3
Use to Navigate
PROGRAM MODE
PRESS TO ENTER
1. SELECT SIZE
Use to Select
RECIPE SETUP
EXIT YES
1. SELECT SIZE
• Single mode will only allow one
size beverage. Multi-drink mode
must be selected for setting up
small and large beverages.
• Navigate to the next setting.
STEP 4
Use to
Navigate
USER SELECT MODE
SINGLE MULTI
1. SELECT SIZE
• You can navigate to
any switch to make a
custom beverage.
• Press SELECT.
STEP 5
Use to
Navigate
Use to
select.
1. SELECT SIZE
SETUP SW 1 RCPE
NO YES
NORMAL
PRGM
RINSE
• Sets the dispense time for a
small beverage.
• Single cup mode will have small
or large to select from.
• Navigate to the next setting.
STEP 7
Use to
Navigate
Use to
decrease
Use to
increase
SW 1 SMALL TIME
(-) #.# sec (+)
1. SELECT SIZE
• Sets the dispense time for a
Large beverage.
• Single cup mode will have small
or large to select from.
• Navigate to the next setting.
STEP 8
• Does beverage need an
ESPRESSO SHOT? If YES, it will
use the corresponding size set
for single touch or for the size
button selected in Multi.
• Navigate to the next setting.
STEP 9
Use to
Navigate
Use to
select
Use to
select
ESPRESSO SHOT?
NO YES
1. SELECT SIZE
Use to
Navigate
Use to
decrease
Use to
increase
1. SELECT SIZE
SW 1 LARGE TIME
(-) #.# sec (+)
• Navigate to BEVERAGE to
create a CUSTOM beverage
recipe.
• Press navigate to enter the
next setting.
STEP 6
Use to
Scroll
Use to
Navigate
1. SELECT SIZE
SWITCH 1 RECIPE
(-) BEVERAGE (+)
Use to
Scroll
continued >