G1, G2 & G3 GRINDERS
USE & CARE INSTRUCTIONS
STEP 1 STEP 2 STEP 3 STEP 4
Raise the top lid and add the
whole bean coffee. Close the
top lid.
Allow the bag to rest on the
screen beneath the chute.
Turn the selector knob to align
the red arrow with the desired
grind.
STEP 5
Turn the ON/OFF switch to ON and
press the start switch.
STEP 6 STEP 7
STEP 8
39563.0000A 10/06 ©2006 Bunn-O-Matic Corporation
39563 102506
Locate the back of a bag behind
the dispense chute. (The grinder
will not operate unless the bag
is behind the chute.) This will
activate the bag switch.
Flip the cleaning lever a few times
as dispensing slows.
Remove the bag when ground
coffee is no longer dispensed
from the chute. The grinder will
stop automatically when the bag
is removed.
NOTE - The start switch will have
to be pressed again to continue
the cycle if the bag is removed
before grinding is completed.
Turn the ON/OFF/START switch
to the OFF position.
COFFEE GRINDING
To Next Page
Need help?
General
