8
TROUBLESHOOTING (cont.)
PROBABLE CAUSE
1. Hopper
2. Entrance to grind chamber
3.Shear Plate
PROBLEM
Grinder starts, but will not dis-
pense.
REMEDY
Coffee must be poured into hopper
before grinding.
Foreign materials must not block the
opening at the bottom of the hop-
per.
Remove both black fillister head
screws holding the grinder selector
dial plate to the grinder. Carefully
remove the dial plate and rotor cup.
Inspect the shear plate for wear.
Replace if excessively worn or dam-
aged.
To Next Page
Loading...
