Page 18
PROGRAMMING THE BREWER (cont.)
PROGRAMMING FUNCTIONS - LEVEL 2 (cont.)
SET TEMP
This function allows the operator to adjust the brew
water temperature in the tank. This also sets the hot
water faucet dispense temperature.
Procedure for setting the Set Temp
Range: 185° to 205° F (85° - 96° C)
1. Press and hold the right hidden button until the
display reads SET LANGUAGE. Press and release
the right hidden button until the display reads SET
TEMP: XXX°.
2. Using (-) and (+), adjust the brew and faucet tem-
perature.
3. When finished, press DONE to save the new setting
and to advance to the next function screen, READY
TEMP: XXX°. Press and release either ON/OFF but-
ton to exit programming and return to the MAIN
SCREEN.
READY TEMP: XXX°
(-) DONE (+)
SET TEMP: XXX°
(-) DONE (+)
40119 071107
To Next Page
Loading...
