burmeier ECONOMIC II 51.0714.33 User Manual (English)

Questions and Answers:

K
Kimberly MonroeAug 11, 2025
What to do if the burmeier ECONOMIC II 51.0714.33 hand switch/drive system is not working?
- S
  Scott WoodardAug 11, 2025
  If the hand switch or drive system isn't working, there are several potential causes: * The main power cable might not be plugged in. Ensure it's properly inserted. * There might be no power supply to the socket. Check the socket and fuse box. * The hand switch plug could be improperly connected. Test the plug connection. * The functions might be blocked on the hand switch. Unlock the functions. * The hand switch or drive system may be defective, in that case inform your operator about necessary repairs.
J
james90Aug 17, 2025
Why do burmeier ECONOMIC II 51.0714.33 drives only operate for a short time when buttons are pressed?
- R
  Robert BrownAug 17, 2025
  The drives may only operate for a short time due to: * Too much weight on the bed. Reduce the load. * An obstacle blocking the bed. Remove the obstacle.
B
Brianna BrownAug 23, 2025
What to do if individual drives operate in one direction only on burmeier ECONOMIC II 51.0714.33?
- C
  Christian RobertsAug 23, 2025
  If individual drives operate in one direction only, the hand switch, motor drives, or control unit could be defective. Inform your operator about necessary repairs.
M
Mark SanchezAug 29, 2025
Why do drives stop suddenly after prolonged adjustment times on burmeier ECONOMIC II 51.0714.33?
- K
  Kevin KleinAug 30, 2025
  If the drives suddenly stop after prolonged adjustment, the thermo switch in the transformer (drive unit) may be triggered. Ensure you adhere to the minimum pause time.
J
Jessica CrossSep 4, 2025
What to do if the wrong function is active when hand switch buttons are pressed on burmeier Medical Equipment?
- J
  Jeffery HernandezSep 4, 2025
  If the wrong function is active when you press the hand switch buttons, the internal motor plugs may be incorrectly connected (mixed up). Inform your operator about necessary repairs.

burmeier ECONOMIC II 51.0714.33 Specifications

General

Category	Medical Equipment
Safe Working Load	150 kg
Mattress platform dimensions	2000 x 900 mm
Height adjustment	Electric
Castor diameter	125 mm
Weight	120 kg
Type	Hospital Bed
Weight Capacity	150 kg
Frame Material	Steel
Product Name	Burmeier ECONOMIC II
Height adjustment range	40-80 cm
Total Width	101 cm
Total Length	212 cm
Wheel Size	10 cm
Brakes	Yes

Related product manuals

burmeier ECONOMIC II 51.0714.33 User Manual

Table of Contents

Questions and Answers:

burmeier ECONOMIC II 51.0714.33 Specifications

Related product manuals