32
Parts and hardware
Thanks for bringing Burrow into your home.
Everything we make is incredibly simple to
set up, including your new media console.
We recommend having an extra set of
hands to help out, so be sure to grab a
friend before you get started.
1 x
Top panel
1 x
Bottom panel
1 x
Right side panel
1 x
Left side panel
1 x
Interior partition
2 x
Back panels
2 x
Shelves
1 x
Right door
1 x
Left door
4 x
Corner legs
1 x
Center leg
8 x
Shelf pins
7 x
Wood screws
1 x
Ratchet screwdriver
3
Gather both side panels. Check the
stickers to identify which side is which, then
insert the tabs on right side panel into the
corresponding slots on the top panel, then
firmly push the panel toward the tracks to
lock it in place.
4
Take the interior partition and insert it into
the middle slots, with the open side of the
L-shape facing the tracks, and firmly push to
lock it in place.
1
Lay the top panel upside-down on a soft
surface, like a carpet or the flattened
cardboard box. The edge with the tracks is
the front side.
2
Screw all eight shelf pins into the inserts on
the side panels and partition before setting
up anything else.
To Next Page
Loading...