20
If you require any technical guidance or find that your product is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
Functions
Simple everyday use
The Control Panel
Operating the Machine
If you have used any extra function in the washing
program that you last used, that function will be active in
the next washing program. If you want to cancel that
function for the newly selected program, press and hold
the button of the relevant function since the
corresponding lights go off, or press the On/Off button
(4) to switch off the machine. If you want to use an extra
function for the newly selected program, select the
desired functions.
NOTE: If you switch off the machine after selecting the
delay time and starting the program, the delay time will
be cancelled.
NOTE: You can press the delay button (2) before the
program starts to delay the program start time for 1 to 19
hours.
If you want to change the delay time, press the Start/
Pause button first, and then press the Delay button to
select the new delay time. Press Start/Pause button to
activate the new delay time. To cancel the delay, press
the Delay button until the delay time is 0h.
NOTE: Salt refill indicator (9) will
become on if salt is missing/insufficient. In this case,
please fill the salt compartment.
NOTE: Rinse aid refill indicator (9) will
become on if rinse aid is missing/insufficient. In this case,
please fill the rinse aid compartment.
You can press the On/Off button (4)
to switch on the product. On/Off lights will be on
so long as the machine is on. Press the program
button (5) to set the suitable program.
Press the Start/Pause button (6) to start the
program. Once the selected program has started,
the Washing light will be on and the program
duration will be displayed. If you open the door of
the machine while the program is continuing,
program number and program duration will be
displayed alternately.
You can follow the program flow with the
Washing, Rinsing, Drying and End lights (7) on the
control panel. Once the drying light has become
on, the machine will remain silent for 40 to 50
minutes.
NOTE:
If you press the option (3) button once, half
load option will be activated. This option will
shorten the durations of the selected programs to
reduce power and water consumption. If you are
using combined detergents that contain salt, rinse
aid and extra features, press the option button for
the second time and activate the tablet function.
You can use the Extra button (1) to add the
following functions to the compatible washing
program.
When the hygiene function (8) is active, you can
make the washing process more hygienic by
changing the washing temperature and durations
of the current program.
If you select the extra rinsing (8) function, the extra
rinsing light will become on and thus, washing-
rinsing steps will be added to the selected
program, making your dishes cleaner and shinier. .
If you select the extra drying (8) function, the extra
drying light will become on
and thus, drying duration of the selected program
will extend, making your dishes drier. Additionally,
Hygiene and Drying functions cannot be selected
at the same time since they are incompatible with
each other
9
To Next Page
Loading...
