Sound Menu Content
Dolby Audio
Smart, Movie, Music, News and O options will be available. Set as O to disable.
Note: Some items in Sound menu will be greyed out and unavailable if set to an option other
than O.
DTS TruSurround Enables or disables the DTS TruSurround.
Sound Output
Sets the sound output preference. TV, S/PDIF and HDMI ARC options will be available.
There will be no sound output except through the selected option. If HDMI ARC option
is selected, CEC feature will be enabled.
Note: Depending on the selected option some items in Sound menu will appear as greyed out
and will be unavailable.
AVL (Automatic Volume
Limiting)
Sets the sound to obtain fixed output level between programmes.
If the Dolby Audio menu item is set to an option other than O the AVL setting options
will change. Auto, Night, Normal and O options will be available. In Auto mode the
TV will switch to Normal or Night mode automatically according to the current time
information. If no time information is available this option will always function as Normal.
When the TV switches to Night mode for the first time after setting this option as Auto, an
information bar will pop up on the screen.Please note that compared to Normal mode
Night mode provides more aggressive dynamic compression control which is suitable
for silent environments.
Advanced Settings
Equalizer Selects the equalizer mode. Custom settings can be made only when in User mode.
Dynamic Bass Enables or disables the Dynamic Bass.
DTS DRC
Dynamic Range Control provides gain adjustment of the source to maintain suitable
audible range at both low and high playback levels. It will function only if the source
audio format is DTS. Enable or disable the DTS DRC by setting as On or O.
Sound Mode You can select a sound mode (if the viewed channel supports).
Digital Out Sets digital out audio type.
Headphone/Lineout
When you connect an external amplifier to your TV using the headphone jack, you can
select this option as Lineout. If you have connected headphones to the TV, set this
option as Headphone.
Please ensure before using headphones that this menu item is set to Headphone. If it
is set to Lineout, the output from the headphone socket will be set to maximum which
could damage your hearing.
Headphone
Sets headphone volume. This option will not be available if the Headphone/Lineout
option is not set as Headphone.
Please ensure before using headphones that the headphone volume is set to a low level,
to prevent damage to your hearing.
Balance
Sets sound balance. This feature will be activated if Sound Output option is set as
TV
or Headphone Only. Balance item adjusts the balance level of the TV speakers and
headphone together.
Reset Resets some of the sound settings to factory defaults.
Press OK to open the Audio Link menu screen. Using this screen you can discover and
connect the sound devices to your TV wirelessly.
Advanced features
Getting the most from your TV
Advanced features
30
If you require any technical guidance or find that your TV is not operating as intended, a simple solution can often be found in the Troubleshooting section of these instructions,
or online at www.bush-support.co.uk. If you still require further assistance, call one of our experts on 0345 604 0105, a Bush enquiry line.
To Next Page
Loading...
