or online at www.argos-support.co.uk If you still require further assistance, call one of our experts on 0345 257 7271 .
Installing your refrigerator
Bringing it all together
Installing your refrigerator
21
Door Reverse
NOTE: The picture above is only for reference. The actual cŽŶĮguraƟon will depend on the physical
product or statement by the distributor.
11.Carefully set the upper door back into place. Screw the upper hinge to the top of the unit. Ensure
the door is aligned horizontally and vertically so that the seals are closed on all sides before finally
tightening the upper hinge.
12. Put the hinge cover back on top of the upper hinge. Insert the hole cover to the right side.
13. With the doors closed, check that the doors are aligned horizontally and vertically and that the seals
are closed on all sides before finally tightening the bottom hinge. Re-adjust the levelling feet as needed.
To Next Page
Loading...
