5
(L) speaker supports Speakerphone.
4. To disconnect the TWS connection, press both Plus and Minus buttons on one of the speakers simultaneously until
the LED Indicator ring rapidly blinks orange to indicate the TWS connection has been disconnected.
INDOOR/OUTDOOR EQ MODE
Note: the Wingman default mode is Indoor.
CLEANING AND GENERAL CARE
IMPORTANT NOTE: To ensure the Wingman is water resistant, remove all cable connections and close the port protection
cover tightly after charging and before use.
Follow these tips for proper cleaning and maintenance:
•
•
to heavy rain or other direct streams of water, and will not withstand submersion in water or other liquids.
• When you are not using the speaker/remote, please store it in a secure, dry indoor location for additional protection.
TROUBLESHOOTING
Never disassemble your Wingman speaker. Irreparable damage can result from unauthorized service attempts,
which also void the warranty.
If unit does not turn on:
• Depress Power button fully.
• Charge internal battery. If unit does not respond to power button after fully charging, return to Bushnell for service and/
or replacement of the internal battery pack.
If unit powers down during use:
•
Problems pairing with phone via Bluetooth:
• The Speaker is within 10m from the device.
• The Speaker is in pairing mode, the LED indicator blinking orange and orange.
No Sound
• Make sure the music volume is at audible level on both your device and speaker.
• Make sure your device is successfully paired with the speaker, the LED indicator turn solid orange.
Poor sound quality
• Move the device closer to the Wingman or remove any obstacle between them.
Buttons do not function
•
LED Indicator Ring turns off.
To Next Page
Loading...
