Need help?Do you have a question about the Bushnell HOLOsight 51-0021 and is the answer not in the manual?
General| Magnification | 1x |
|---|---|
| Waterproof | Yes |
| Reticle | 1 MOA Dot |
| Reticle Color | Red |
| Shockproof | Yes |
Powers the Holosight with N or AA batteries. Reticle brightness fades abruptly. Battery condition check is available.
Instructions for removing, installing, and orienting batteries in the compartment for proper operation.
Turns the sight on and performs an automatic battery check, indicating status via reticle blinking.
Turns the sight off by simultaneously pressing both the UP and DOWN arrow buttons.
Adjusts the reticle brightness intensity using dedicated push-buttons with 20 dynamic settings.
Automatically shuts the sight off after 8 hours of inactivity to conserve battery power.
Step-by-step guide for mounting the sight onto a standard 1" dovetail or Weaver rail for optimal alignment.
Importance of bore sighting for initial alignment and using sight adjustments for fine-tuning.
Details on making precise windage and elevation adjustments for accurate targeting.
Identifies the unit as a Class II laser product and outlines safety precautions for the beam.
States that the device complies with Part 15 of the FCC Rules for operation.
Guidelines for cleaning the optical system and general care to ensure long-lasting, proper performance.
Details the two-year warranty against defects and outlines the procedure for returns and repairs.
To Next Page
