EasyManua.ls Logo

Bushnell Legend E Series - Basic Adjustments; Adjusting Interpupillary Distance; Adjusting for Individual Eye Strength; Using Objective Lens Covers

Bushnell Legend E Series
40 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
6
Thank you for purchasing your new Bushnell Legend Series E, Series L or Series M binoculars.
This manual will help you optimize your viewing experience by explaining how you can adjust the binocular
to your eyes, and how to care for this instrument. Read the instructions carefully before using your binocular.
BASIC ADJUSTMENTS
How to Adjust for Distance Between Your Eyes
The distance between the eyes, called “interpupillary distance,
varies from person to person.
To achieve perfect alignment of lens to eyes, follow these simple steps:
1. Hold your binocular in the normal viewing position.
2. Grasp each barrel rmly. Move the barrels closer together or
further apart (Fig. 1) until you see a single circular eld. Always re-
set your binocular to this position before using it.
How to Adjust for Individual Eye Strength
As individual eyesight varies from one person to another, your Bushnell
Legend binocular has a diopter adjustment which allows you to ne-tune
the binocular to your vision. Follow the focusing instructions on the next
page.
Using the Objective Lens Covers
When using your Legend binoculars, ip open the objective lens covers
as shown at right. To prevent accidental loss, the covers are tethered to
(removable) rubber security rings. When you are nished using the binoculars,
put the covers back in place to protect the binoculars lenses.
Fig. 1 Interpupillary Distance Adjustment

Related product manuals