buster L - Page 31

 Inha Works Ltd. 2009 31 (31)
General requirements
Basic information EN ISO 8666:2002
A2.1 Hull markings ISO 10087:1996 / A1:2000
A2.2 Manufacturer's plate RCD annex I, 2.2
A2.5 Owner's Handbook EN ISO 10240:2004
Arrangements and equipment
A2.3 Prevention of falling overboard EN ISO 15085:2003
A3.7 Stowing life raft -
A3.8 Emergency exit -
A3.9 Anchoring, mooring and towing EN ISO 15084:2003
A5.7 Navigation lights 1972 COLREG
A5.8 Prevention of emissions and discharges -
Installations
A5.1 Engines and engine space -
A5.2 Fuel system EN ISO 11105:1997
A5.3 Electrical system EN ISO 10133:2000, ISO 8846:1990
A5.4 Steering system EN ISO 28848 + A1:2000
A5.5 Gas equipment -
A5.6 Fire prevention EN ISO 9094-1:2003
Dimensions
A3.1 Structure RSG Guidelines, NBS-VTT Extended rule
Hydrostatics
A3.2 Stability and freeboard EN ISO 12217:2002
A3.3 Buoyancy EN ISO 12217:2002
A3.6 Maximum permitted load EN ISO 14946:2001/AC 2005
A3.4 Hull and deck openings EN ISO 9093-1:1997
A3.5 Filling with water EN ISO 15083:2003, ISO 8849
Drive characteristics
A4 Drive characteristics EN ISO 11592:2001, EN ISO 8665:2006
A2.4 Visibility from the steering position RSG Guidelines, EN ISO 11591:2000
B1 Motor identification -
C1 Noise levels -
- = is not relevant for the security of the particular boat model, or the system in question is not used in the boat.