14
When using your product for the first time;
• Before connecting electric cables, you must not forget to cut the power
supply. Be sure that electrical connections of the product are established
correctly and safely.
• Be sure that safety equipment is connected correctly.
• Properly establish earthing connections.
• Be sure that the cable and electric connection box are closed correctly
and do not admit water leakage.
• Power supply, current and frequency values shall comply with the product
label.
• If any electricity warning device turns on, electric connection should im-
mediately be cut from the main power supply. Before starting the product,
all the installation should be controlled again carefully.
• If any problem occurs, please consult authorized persons.
In case of any defect after you have started using the product continuously,
the type of defect should be determined. In order to remove the defect, the
technical service must be contacted. You must not try to fix the problem
yourself.
CLEANING, MAINTENANCE and TRANSPORT
In order to protect your product from being damage during transport;
• The product has been packaged according to normal transport
conditions. In order to avoid possible damage, it should always be
carried in its original package.
• The product shall be kept in its own package in a vibration-free, dust-free
environment away from abrasive orchemical material until it isdelivered
to its placeof assembly. Do not accept the products which are not in their
original package or which were opened before being delivered to you.
• The products should be stocked into the vehicle in a way to stay
motionless in case of any turn over or fall down.
• While heavy products are being carried, use appropriate lifters to protect
products or the people carrying the products.
• All necessary measures should be taken in orderto prevent damages
arising from sudden and careless lifting and putting down.
To Next Page
Loading...