To Next PageTo Next Page
Need help?Do you have a question about the BW Broadcast RBRX1 and is the answer not in the manual?
General| Frequency Range | 87.5 - 108 MHz |
|---|---|
| Power Supply | 90-264 VAC (Universal) |
| RF Connector | BNC |
| Sensitivity | < 2.0μV for 50dB S/N |
| Dimensions | 484 x 44 x 270mm (19” 1U) |
| Audio Outputs | Balanced XLR, Unbalanced RCA |
| RDS Decoding | Full RDS Decoding with all data groups supported |
Detailed description of the RBRX1's capabilities, features, and unique selling points.
Detailed breakdown of the RBRX1's menu hierarchy and options.
Explanation of the RBRX1's front panel interface, navigation, and parameter editing.
Steps to configure the RBRX1's network settings, including DHCP and static IP.
Instructions for accessing and using the RBRX1's web interface for control and monitoring.
Details on configuring and using the Telnet interface for remote command-line control.
Description of the RBRX1's signal processing stages, including IF filtering and audio adjustments.
Details on setting up the adaptive IF filter for channel suppression and distortion minimization.
Explanation of the stereo blend algorithm and its adjustable parameters.
How the high cut filter reduces noise at the expense of bandwidth.
Loading, saving, editing, uploading, and downloading presets on the RBRX1.
Managing PCM audio files and playlists for backup playback.
Configuring alarms, outputs, n-stage fallback, and triggers/inputs.
Storing system log messages on the RBRX1's internal flash memory.
Outputting log information through the serial port.
Sending log messages to a remote host via UDP.
Configuring the RBRX1's internal real-time clock for scheduling.
Setting up timed events to switch presets based on day, week, or month.
Enabling and configuring a front panel lock code and screen saver timeout.
Procedure for installing firmware updates using the RBRX1's web interface.
Steps to confirm that the firmware update was installed correctly.
Configuring the RBRX1 for rebroadcasting FM signals with and without local RDS.
Setting up automatic switching to backup audio based on alarms or triggers.
Configuring the RBRX1 to change frequency based on external trigger input.
Configuring the RBRX1 for use as a high-quality off-air FM receiver.
Configuring the RBRX1 for silence detection and automatic fallback to backup sources.
Detailed electrical and performance specifications for the RBRX1 receiver.
List and description of all tunable parameters related to frequency, IF filter, and audio.
List and description of parameters for digital and analog audio outputs and headphone level.
Parameters for configuring the MPX generator, including source, pilot protection, and levels.
Configuration options for RDS data, including PTY, flags, and traffic information.
Setup for configuring external triggers to change presets or send email alerts.
Setting up alarms based on signal thresholds and configuring actions like preset changes.
