BYD ATTO 3 2023 - Blind Spot Assist (BSA)

CAUTION
relevant precautions for ACC and
LKS when you are using ICC.
Blind Spot Assist (BSA)*
The blind spot assist (BSA) system
includes the following functions: blind
spot detection (BSD), door open warning
(DOW)*, rear collision warning (RCW),
rear cross tra󽗋c alert (RCTA), and rear
cross tra󽗋c assist with braking (RCTB).
It recognizes current tra󽗋c conditions
through radar sensors so as to remind the
driver of safe and careful driving.
Usage
Enable or disable BSA in → ADAS
→ Active Safety. When the vehicle
is started, the system defaults to the
previous settings.
BSD
When speed is above 15 km/h and the
sensor detects a vehicle within the blind
spot of a side mirror or approaching
quickly on the adjacent lane, its indicator
lights up. If the turn signal for the same
side is turned on at this moment, the
alarm indicator on the side mirror 󽗊ashes
to alert the driver of a risky lane change.
DOW*
●
Door Open Warning(DOW) detects
conditions that may endanger vehicle
safety from the rear when the vehicle
stops and a door is about to open, and
gives a light warning.
●
The rear radar recognizes targets
within close range from the rear and
on both sides, detects conditions that
may endanger vehicle safety from the
rear, and alerts you with a warning
light.
●
Detection targets include non-power-
driven vehicles such as bicycles,
electric scooters, three-wheelers,
motorcycles, powered vehicles such
as trucks, sedans and buses, as well
as pedestrians and other moving
objects that may endanger tra󽗋c
safety.
RCW
At vehicle speeds above 5 km/h, if radar
sensors detect a risk of collision with a
vehicle approaching quickly from behind
on the current lane, the vehicle hazard
warning light and the side mirror warning
indicators* 󽗊ash to timely alert the driver.
An alarm will sound to warn the driver of
the approaching vehicle of collision risk.
Rear cross tra󽗋c alertRear cross tra󽗋c
alertRCTA
●
RCTA helps the driver check the
transverse cross areas on both sides
at the back of the vehicle. When
the vehicle moves backward, it tells
131
04
USING AND DRIVING