Infotainment
System
Infotainment Touchscreen
When the ignition is switched on, the
initial screen is displayed for several
seconds and the infotainment system
starts to work. To better experience
infotainment functions, such as apps and
Internet calls, the system must be used
after network connection.
A warning is displayed when the
infotainment system starts for the rst
time. Tap Agree to enter the system.
You can use the customized infotainment
touchscreen as needed. A shortcut menu
is provided for your convenience, which
may include WLAN, Bluetooth, mobile
data connection, volume, light mode, and
some vehicle controls.
① Infotainment touchscreen
② Scroll button
●
When the infotainment system is
already started, press the button to
turn audio o, press a second time
to turn audio on. Press and hold the
button for three seconds to restart the
infotainment system.
●
Scroll up to turn volume up or down
to turn volume down. Volume ranges
from 0 to 39. A mute icon is displayed
when volume is 0.
Reset to factory settings
●
This function factory resets the
infotainment system.
●
During the process, do not touch any
infotainment button or turn o the
power supply, or errors may occur.
●
The process takes two to ve
minutes, please wait patiently.
WARNING
●
Do not use a high-power inverter
in the vehicle, as this may cause
infotainment system malfunction.
●
Do not format or root the device
without authorization, as this may
cause infotainment system or
vehicle malfunction.
●
In driving, please use the
infotainment system in landscape
mode wherever possible for your
safety.
CAUTION
●
To prevent damage to the
touchscreen:
●
Touch the screen gently. If there
is no response, remove nger
from the screen, then touch it
again.
●
Clean the screen with a soft
damp cloth. Do not use any
cleaning product.
●
Using the touchscreen
●
When the screen temperature is
low, the image displayed may be
darker or the system may work
slightly slower than normal.
150
To Next Page
Loading...
