BYD ATTO 3 2023 - Page 160

3 PM2.5 detection button 5
In-vehicle PM2.5 value and level
display
PM2.5 Detection Button
●
Tap on the "PM2.5 detection"
button to activate and detect
PM2.5 concentration inside/outside
in realtime, which will be displayed
in real time on the infotainment
touchscreen.
●
PM2.5 detection will stop if the button
is tapped on again.
Quick Puri󽗉cation Button
●
This function can quickly reduce the
concentration of PM2.5 particles in the
air inside the compartment in a short
time.
●
Tap on this button to activate and
enable the function; and tap on the
button again to exit.
In-Vehicle PM2.5 Value and Level
Display
●
The area displays the PM2.5 value and
level outside/inside the vehicle.
●
The PM2.5 value detected by the on-
board air puri󽗉cation (PM2.5) detector
is the PM2.5 value in the air near
the vehicle carrying the device in a
short time, which should be di󽗈erent
from the daily or real-time PM2.5 value
declared by national and relevant
government authorities.
Here is a reference of air quality grade:
Range of PM2.5 Values Air Quality Grade
0-35 Good
36-75 Moderate
76-115 Detrimental to sensitive groups
116-150 Unhealthy
151-250 Very unhealthy
251-999 Hazardous
REMINDER
●
The frequency of PM2.5 detection
should be reduced in the
following environments:
●
Sandstorms and other such
extremely harsh environments.
REMINDER
●
Cold regions (with ambient
temperature below -20°C).
●
High humidity environments
(relative humidity >90%).
●
Environments with a change
in temperature (prone to
159
05
IN-VEHICLE DEVICES