CAUTION
are seated on a rear outboard
seat.
●
Always follow the detailed instructions
provided by the manufacturer of the
child restraint system.
●
Secure the top tether when installing
the CRS.
●
Never leave a child restraint system
loose in the car.
●
Always secure it according to the
instructions for the child restraint
system, or store it in the safely in the
luggage compartment.
Installing Child Restraint Systems
Rear outboard seating positions
●
The rear outboard seats are equipped
with ISOFIX/i-Size anchorages.
●
The anchorage locations are identied
by a marking (see illustration) located
on the seatback, directly above the
associated anchorages.
●
The rear seats are equipped with
tether strap anchorages on the back of
the seat.
Installing the child restraint system
1. Check the position of the special
anchorage and install the child restraint
on the seat.
CAUTION
●
The anchorages are located in the
gap between the seat cushion and
the seatback.
●
When any child restraint system is
installed, except for a booster seat
without a back, it is advised that the
adjustable head support is removed,
and stowed safely.
●
When a booster seat without a back is
installed, the adjustable head support
must remain tted, and adjusted to the
appropriate height for the seated child.
●
When the seat position does not
have any child restraint system or
booster seat installed, the adjustable
head support must remain tted, and
adjusted to the appropriate height for
the occupant.
24
To Next Page
Loading...
