BYD ATTO 3 2023 - Locking;Unlocking Doors

●
Press the "PUSH" button and insert the
mechanical key back into the smart
key when it is not in use.
NFC Key Card
●
Hold the NFC key card close to the NFC
sign on the left side mirror. Then, all
doors can be unlocked or locked when
the vehicle is powered o󽗈.
CAUTION
●
NFC key card is an
electronic product. The following
instructions must be observed
to prevent function failure of or
damage to the card:
●
Do not place the NFC card in the
charging area when the wireless
charger is on.
●
Do not attach any object (such
as a metal seal or metal
phone case) that may cut o󽗈
electromagnetic waves, when
using the NFC card.
●
Do not place the NFC card
in a position exposed to high
temperature, such as on the
dashboard.
●
Do not bend the card with force.
●
Do not place the card with other
hard objects.
●
NFC key cards use near-
󽗉eld communication technology,
CAUTION
requiring a detection distance of
less than 2 cm. When identifying,
it is recommended to place the
NFC card close to the side mirror
for 1-2s.
●
The NFC smart card is a key
con󽗉gured for the vehicle based
on the near 󽗉eld communication
method. In order to ensure vehicle
safety, handle it with care. If it
is lost, going to BYD authorized
dealer or service provider for
blocking of the lost card and re-
con󽗉guration is recommended.
Locking/Unlocking Doors
Locking/Unlocking with Mechanical
Key
Insert the key into the key hole, turn and
remove the key, and pull the door handle
to open the door.
●
Unlock the driver's door: Turn the key
clockwise.
●
Lock the driver's door: Turn the key
counterclockwise.
50