BYD ATTO 3 2023 - Folding Rear Seats; Head Supports

●
This function is always disabled when
the vehicle is just powered on.
Folding Rear Seats
●
Flipping and lowering the seatback
●
Pull the cord to straighten the
seatback.
●
Push the seatback forward/backward
to fold it. You can fold the seatback
forward until the back touches the
cushion, or you can fold it backward
until reaching the locking position
(with a locking click).
Head Supports
Adjusting Head Supports
1. Lifting a head support
Lift the head support to a proper
position, and release it after hearing a
locking sound.
2. Lowering a head support
Press and hold the head support
adjustment button, lower the head
support to a proper position, and then
release the button after hearing a
locking sound.
3. Removing a head support
Press and hold the head support
adjustment button, remove the head
support, and release the button.
4. Installing the head support
Insert the head support post into
the bushing with the grooves facing
forward. Press the head support
adjustment button, push down the
head support to a proper position, and
then release the button.
REMINDER
●
Head supports protect vehicle
occupants from head and neck
injuries. Adjust the head support
so that its center aligns with
the back of your head for
maximum protection. Adjust the
head support to the proper
position based on your actual
height.
●
When adjusting head support
height, align the occupant's ear
tip line with the center line of the
head support.
●
After adjusting the head support,
ensure that it is locked into
position.
●
Do not drive the vehicle without
head supports.
61
03
CONTROLLER OPERATION