② BSA switch*
Press this switch to activate blind spot
assist. See
P73
for details.
③ AVH switch*
Press this switch to activate automatic
vehicle hold. See
P118
for details.
Window Control Switch
on Passenger Side
When the ignition is on, the window
control switch on the passenger side can
be used to roll windows up or down.
Hazard Warning Light
Switch
When the
button is pressed, all turn
signals and turn signal indicators on the
instrument cluster start ashing. They
all stop ashing when the
button is
pressed again.
CAUTION
●
The hazard warning lights are
used to alert drivers and
pedestrians of possible risks.
Mode Switches
These switches enable drivers to select
from the dierent regenerative braking,
snow, and ECO, SPORT or NORMAL
modes.
① Regenerative braking mode button
●
The default setting is the standard
regenerative braking mode.
●
Toggle up the lever ① to increase
regenerative braking force.
② Snow mode button
●
Press down the snow mode switch ②
to put the vehicle in snow mode.
●
This mode is recommended on fairly
strong surfaces covered in slippery
74
To Next Page
Loading...
