●
Release the sunshade open button
① immediately after touching it. The
sunshade opens automatically. For
the sunshade to stop at its current
position, touch the ① or ② button
midway.
Closing the sunshade
●
Press and hold the sunshade close
button ② to close the sunshade
manually. Release the button midway
to stop the sunshade at its current
position.
●
If the sunshade has been initialized,
releasing the sunshade close button
② immediately after touching it closes
the sunshade automatically. For the
sunshade to stop at its current
position, touch the ① or button ②
midway.
CAUTION
When opening or closing the sunroof
sunshade, avoid forceful contact
with its curtain, to prevent damage.
Sunroof Anti-pinch
If the sunroof or sunshade closing process
is obstructed by anything, it will stop and
slightly retract.
WARNING
●
Keep clear of the sunroof when
it is opening or closing, or severe
injury may occur.
●
Passengers must refrain from
sticking hands or their heads out
through the sunroof. Otherwise,
severe injury or even death may
occur.
CAUTION
●
Trying to open the sunroof in
outside temperatures below 0℃
or when it is covered in snow or
frost may damage the sunroof or
its motor.
Initialization
●
With the ignition on, the signal remains
valid and the sunroof is in the
uninitialized state, try the following
steps for initialization:
●
Press the close button once to fully
close the sunroof/sunshade.
●
If the sunroof/sunshade does not
close fully, calibrate manually. Press
and hold the sunroof/sunshade
close button, and release it when
the sunroof/sunshade stops moving.
Hold the button again for at least
seven seconds, and release it until
the sunroof/sunshade is fully closed
and a click sound is heard.
●
The sunroof and sunshade are
initialized separately.
Interior Light Switch
Front Interior Lights
Left interior light button
78
To Next Page
Loading...
