EasyManua.ls Logo

BYD ATTO 3 2023 - Page 90

BYD ATTO 3 2023
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
WARNING
Never drop the Mode 2 equipment
or pull it directly by its cable.
Take caution when moving the
equipment. Store the equipment
in a cool place after use.
Using AC Charging Piles *
1. Equipment
Single-phase AC charging box*
Use a standard-compliant household
charging box. For how to use the
charging equipment, refer to its user
manual and follow the operating
steps.
The single-phase AC charging box
consists of a charging box, a charging
connector, and a connecting cable.
For information on circuit breaker
and emergency stop switch, see the
charging box user manual.
Single-phase AC charging pile
Charge the vehicle using an AC
charging pile in a public place.
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
2. Charging
Unlock the vehicle and open the
charge port door:
Close the charge port cap and the
port door (See instructions for mode
2 charging).
Connect the vehicle port:
Plug the charging connector into the
port and make sure it is tight.
Charging settings:
For AC charging pile/box subject to
authentication, swipe the card or
scan the QR code. See the user
manual for charging pile/box for
details.
The charging connection indicator
lights up on the instrument cluster.
In the charging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
At this time, you can schedule smart
charging on the infotainment system.
3. Stopping charging
End the charging:
Charging stops automatically when it
is interrupted by the user, or when
the battery is fully charged.
Unplug the charging connector:
Disconnect as per the instructions for
Mode 2 charging.
Close the AC charge port door (See
instructions for Mode 2 charging).
Store the equipment properly.
If an AC charging pile/box is used,
place the charging connector in its
designated location in the charging
pile/box.
Using DC Chargers
1. Equipment descriptions
Use the DC battery charger in public
places to charge the vehicle. Generally,
it is installed in a speci󽗉c charging
station.
Equipment speci󽗉cations: Please
check the instructions for the charger.
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
2. Charging
89
04
USING AND DRIVING

Table of Contents

Related product manuals