EasyManua.ls Logo

BYD ATTO 3 2023 - Driving Range Display; Energy Regeneration Settings

BYD ATTO 3 2023
216 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Emergency Unlocking of the Charge
Port
When the electric lock fails and
the charging connector cannot be
unplugged, try to unplug the charging
connector by manually unlocking the
charge port.
Open the hood. A lock latch can be
found inside. Pull the latch to unlock
the charging connector.
Driving Range Display*
The range display mode can be set
to improve driving experience. The
default setting is standard mode.
The corresponding settings can be
made in New EnergyEnergy
ManagerRange display mode.
Standard mode: displays the driving
range based on the result of
comprehensive working condition
test.
Dynamic mode: displays the
estimated driving range based on the
available battery power and current
average energy consumption.
The set driving range display mode is
memorized by the system.
When the vehicle is powered o󽗈 and
then on, the display mode set last
time will be maintained.
REMINDER
When the Dynamic driving range
display mode is set:
The driving range that is
displayed after a full charge may
vary, depending on calculations
of the energy consumed the last
time the vehicle is used.
The driving range actually
displayed will be adjusted based
on the state of the vehicle's air
conditioner, the driving mode
(ECO, NORMAL, SPORT, etc.)
selected, and the driver's driving
habits, so as to match the
vehicle's actual driving range.
Energy Regeneration
Settings
During the driving, energy is recovered
through regenerative brakes when
the vehicle decelerates. For higher
e󽗋ciency, do not accelerate or
decelerate the vehicle unnecessarily.
The energy regeneration intensity can
be set with the regenerative mode
button or the infotainment system.
Standard: When the accelerator
pedal is released, the motor
controller recovers energy in the
standard level, and the vehicle
deceleration is in the standard level.
High: When the accelerator pedal
is released, the motor controller
recovers more energy, and the
vehicle deceleration is high.
The corresponding settings can be
made in
New Energy
Energy ManagerEnergy feedback
intensity.
93
04
USING AND DRIVING

Table of Contents

Related product manuals