High beam on or off : Push
forward the light adjustment lever from
its original position (to the opposite side
of steering wheel) to turn on the high
beams; pulling the light adjustment lever
back to its original position to turn off the
high beams.
High beam flashing: Push back the light
adjustment lever from its original
position (to the side close to steering
wheel) to make the high beams flash;
the light adjustment lever will
automatically return to its original
position when it is released and the high
beams will be turned off. By turning the
light adjusting knob to the “OFF”
position, high beams will also flash.
To prevent over-discharge of the battery, do not keep lights on for a long time when
the motor is not running.
To Next Page
Loading...
