3-4 Switches
The switch set #1 includes electric exterior
rearview mirror adjustment switch and headlight
adjustment switch.
Electric exterior rearview mirror adjustment
switch
Electric exterior rearview mirror adjustment
switch (if any; refer to Section IV of Chapter
IV for details).
Headlight adjustment switch
This switch is used to adjust the beam angle of headlights upward/downward. After
low beams are turned on, this switch can be operated.
When the headlight adjustment switch is at level 0, the beam height of headlights is at
the highest level; when the switch is at level 3, the beam height of headlights is at the
lowest level. The driver may set the adjustment switch to a desired level from level 0 to
level 3 depending on his/her need and the beam height of headlights will change
accordingly.
The adjustment level is recommended as follows:
Configuration 1:
Driver only and trunk with maximum load
Configuration 2:
Driver only or driver and front passenger
Driver, front passenger and three rear-row
passengers
All seats occupied and trunk with maximum
load
Driver only and trunk with maximum load