BYD BYD5030XYZBEV1 - Hazard Warning Light Button; Reversing Sensor Power Button (if Any); Reversing Sensor Power Button; Any)

3
Operation of Controller
3-4 Switches
91
Hazard Warning Light Button
As shown in the figure, by pressing the this button,
the hazard warning light button will lock
automatically, all turn signals will start to flash, and
turn signal indicators on the instrument ( and )
will flash synchronously. By pressing the button
again, it will be reset and the turn signals and the
turn signal indicators will stop flashing.
Reversing Sensor Power Button (If Any)
The reversing sensor power button is on by default
and the indicator lights up. When the gearshift lever
is shifted to R position, the reversing sensor will be
activated. A warning prompt message will be given
if there is an obstacle in the surroundings of the
vehicle. To deactivate the sensor, press .
CAUTION
The reversing sensor will be activated by default when the gearshift lever is shifted to
R position. After deactivation, the sensor will be activated again when the gearshift
lever is shifted to R position. The deactivation function is effective only for the current
operation.