BYD G3 AUTO - Page 156

BYD G3 AUTO Owner’s Manual
150
Rear turn signal light
The steps to replace the bulb of rear turn
signal light are the same with fog light.
High Mount Brake Light (optional)
1. Remove rear shelf of interior trim.
2. Remove high mount brake light
assembly.
3. Rotate the light seat anticlockwise
and pull the bulb outwards to remove it.
The steps of installation is opposite to
disassembly
Name plate light
1. Rotate the light seat anticlockwise
to remove it.
2. Remove the bulb.
The steps of installation is opposite to
disassembly