BYD G3 AUTO - Page 75

BYD G3 AUTO Owner’s Manual
69
Heating
To get best effect, set the panel of air
conditioner to the following:
Rotating speed of blower – non 0
gear
Temperature – point at warm (red
area)
Air suction – external recycle
(outside air)
Air flow - floor
Air conditioner - OFF
● To fast warm up, enable internal
recycle for several minutes. To not fog
on the windows, enable external
recycle after the car gets warmed.
● Press “A/C” button to eliminate
moisture and warm up.
● When defrosting and defogging for the
windscreen, select floor/windscreen
air flow to get the car warmed up.
Cooling
To get best effect, set the panel of air
conditioner to the following:
Rotating speed of blower – non 0
gear
Temperature – point at cold (blue
area)
Air suction – external recycle
(outside air)
Air flow – instrument panel
Air conditioner - ON
To fast cool the car, turn the external
and internal recycle mode selecting
knob to internal recycle for several
minutes.
Ventilation
To get best effect, set the panel of air
conditioner to the following:
Rotating speed of blower – non 0
gear
Temperature – point at cold (blue
area)
Air suction – external recycle
(outside air)
Air flow – instrument panel
Air conditioner - OFF
Defogging
Inside of windscreen
To get best effect, set the panel of air
conditioner to the following:
Rotating speed of blower – non 0
gear
Temperature – point at warm (red
area) to warm up;
Point at cold (blue area) to cool down.
Air suction – external recycle
(outside air)
Air flow - windscreen
Air conditioner - ON
● In wet weather, do not blow the
cooling air to the windscreen – indoor
and outdoor temperature difference
may cause serious fogging.