BYD SEAL 2023 - Starting the Vehicle

●
Tir
es: Check tire pressure and
carefully inspect tires for any cut,
damage, foreign material, anomaly,
and excessive wear.
●
Lug nuts: Ensure all nuts are 󽗉tted and
tightened.
●
Lighting: Make sure headlights,
position lights, turn signals and all
other lights are working normally.
Check headlight intensity.
Interior
●
Seat belts: Check whether seat belts
can be properly fastened. Verify that
seat belts are not worn or scratched.
●
Instrument cluster: Particularly,
verify that maintenance indicator,
instrument cluster lighting, and
defroster work properly.
●
Release the brake pedal: Verify that
there is enough space for the brake
pedal to work.
●
Low-voltage battery and cable: Inspect
connectors for any corrosion or
looseness and any cracks in low-
voltage battery housing.
In the engine compartment
●
Spare fuses: Verify that spare fuses of
all rated charges in the fuse box are
available.
●
Coolant level: Verify that coolant level
is correct.
Check after starting
●
Instrument cluster: Con󽗉rm that
the maintenance indicator and the
speedometer work normally.
●
Brakes: In a safe area, drive the
vehicle straight, hold the steering
wheel tightly, decelerate and apply the
brake. Verify that the vehicle maintains
a straight direction.
●
Other abnormalities: Check for loose
parts, leaks, and unusual noises.
If everything is OK, just enjoy your
driving.
S
tarting the Vehicle
Starting the vehicle in normal cases:
●
Carry a valid smart key with you,
depress the brake pedal ② and press
the START/STOP button ① at the
same time, and then the OK indicator
on the instrument cluster illuminates,
indicating that the vehicle is ready for
driving.
●
Shift to "D" or "R" position, and
then the electrical parking brake will
be released automatically. Do not
start driving the vehicle until hearing
a motor release sound from the
electrical parking brake system.
The vehicle cannot power on when
●
The v
ehicle cannot power on when:
●
After you press the START button, the
smart key warning light turns on, a
beep sounds, and the message "No
key detected" is displayed on the
instrument cluster. This means that
the key is not in the vehicle or cannot
be detected due to interference.
●
The key is somewhere unsuitable for
detection, such as on the 󽗊oor, in the
cup holder, trunk, etc.
●
Pressing the START button may not
enable the start function due to:
102