BYD SEAL 2023 - Braking System; Brake Fluid; Washer

any mixture. Di󽗈er
ent brands and
types of coolant should not be mixed.
●
If the le
vel is below the MIN line,
coolant should be re󽗉lled to the MAX
line. Check the cooling system for
leakage.
REMINDER
●
Opening the c
oolant expansion
tank when the motor has not
yet fully cooled down may cause
coolant to squirt out, resulting in
severe burns.
CAUTION
●
Do no
t add any rust inhibitor
or other additives to the cooling
system. This is because these
additives may be incompatible
with the coolant or motor
components.
●
Before opening the coolant
expansion tank, verify that the
motor, high-voltage electrical
control integration module,
coolant expansion tank cap and
the radiator have cooled down.
Braking System
●
Check the le
vel in the 󽗊uid tank
monthly, and change the brake 󽗊uid
according to the travel time and
mileage speci󽗉ed in Maint
enance
Schedule.
●
Be sure to use the brake 󽗊uid of the
same speci󽗉cations as the original
brake 󽗊uid, and di󽗈erent types of
brake 󽗊uid should not be mixed.
●
It is required that the level in the
󽗊uid tank should be between "MAX"
(maximum level) and "MIN" (minimum
level) marks.
●
If the level is below the MIN mark,
check if the braking system leaks and
the brake friction blocks are worn.
Washer
●
During normal use, check the liquid
le
vel of the windshield washer
reservoir at least monthly.
●
If the windshield washer is used
frequently, the level of the washer
reservoir should be checked more
frequently.
●
High quality windshield washer 󽗊uid
should be added to improve stain
removal and prevent freezing in cold
weather.
175
06
MAINTENANCE