BYD SEAL 2023 - Using Tire Repair Kit

2. Open the warning triangle to form a
closed triangle.
3.
Release its supports to create a pattern
as shown.
Using Tire Repair Kit
●
The tir
e repair kit is used to seal small
cuts, especially cuts in tread pattern. It
is just an emergency solution for you to
drive to the nearest service center, and
only for short emergency stretches,
even if the tire is not de󽗊ated.
WARNING
●
The tir
e repair kit is only suitable
for minor damages of tires. If a
wheel is damaged, tyre puncture
sealant kit is prohibited.
●
Tire sealant is highly 󽗊ammable
and harmful to health. Take the
necessary precautions to prevent
󽗉re and avoid contact with skin,
eyes and clothing; keep away
from children; and do not inhale
its vapor.
In case of contact with tire sealant:
●
If tire sealant comes into contact
with the skin or gets into
the eyes, thoroughly 󽗊ush the
a󽗈ected body part immediately
with plenty of clean water.
●
Change contaminated clothing
immediately.
WARNING
●
In c
ase of an allergic
reaction, seek medical attention
immediately.
●
If tire sealant is ingested by
accident, rinse mouth thoroughly
and drink plenty of water
immediately. Do not induce
vomiting and seek medical
attention immediately.
Using the Tire Repair Kit
●
R
efer to labels on the in󽗊ator and tire
sealant for usage of the kit.
●
If the in󽗊ator needs to be connected
to a power source, plug the in󽗊ator
into the vehicle's 12V socket, start the
vehicle, and turn on the in󽗊ator. The
tire sealant is then 󽗉lled through the
in󽗊ator hose into the tire along with
air.
REMINDER
●
Mak
e sure the in󽗊ator switch is
o󽗈 when you plugging the power
supply into the 12V socket in the
vehicle.
●
The in󽗊ator can only be turned on
for up to 10 minutes.
●
Observe the tire pressure gauge
reading on the in󽗊ator.
192