BYD SEAL 2023 - Data Collection and Processing

●
Any door
, trunk, or hood is opened
without using the keyless access
function of the smart key.
Disarming the System
●
Anti-theft alarm can be stopped by:
●
Unlocking the door with a valid smart
key/NFC key.
●
Using the microswitch to unlock the
door by carrying a valid smart key.
●
Opening the trunk remotely with a
valid smart key.
●
Starting the vehicle remotely with a
valid smart key.
●
Pressing the START/STOP button
inside the vehicle while carrying a
valid smart key.
WARNING
●
Do no
t modify the anti-theft
system by means of alteration or
addition. Otherwise, the system
may fail.
Anti-theft Indicator
With the v
ehicle power OFF and four
doors locked, the anti-theft indicator will
stay on for about 10s after the anti-theft
mode is activated.
Data Collection and
Pr
ocessing
Data Collection and
Processing
●
This section provides you with
some important information on how
personal data is collected and
processed when you use a BYD vehicle.
●
For a more detailed overview on data
processing, data protection and data
subject rights, please read the current
version of the privacy policy for the
vehicle available at the infotainment
system (Vehicle Settings → System
Settings → More → Privacy Policy).
●
This vehicle is equipped with an
event data recording (EDR) system.
EDR mainly records data in the
event of a crash or near-crash
(for example, airbag deployment or
hitting on a roadside obstacle) to
help comprehend the vehicle system
operation, such as:
●
Vehicle velocity
●
Tire pressure condition
●
Adaptive cruise control (ACC) system
status
●
Whether the seat belt is fastened
●
The vehicle records EDR data only
when there is a crash or when a
near-crash event reaches a certain
extent. The EDR does not record any
data during the normal driving of the
vehicle.
●
The data recorded by the EDR system
provides an understanding of the
state of the vehicle's safety-related
systems when an accident occurs, so
that relevant parties can analyze the
accident.
29
01
SAFETY