BYD SEAL 2023 - Page 39

con󽗉rm if the k
ey is in the vehicle" is
displayed on the instrument cluster.
●
If you press the START/STOP button
while an electronic smart key matching
the model is in the vehicle, this
warning light does not light up. The
vehicle can now be powered on.
●
If the warning light 󽗊ashes after
you press the START/STOP button, it
indicates low battery of the key.
●
If the key is not in the vehicle, the
instrument cluster prompts "No key
detected, please con󽗉rm if the key is
in the vehicle".
ABS fault warning light
●
This w
arning light comes on when the
ignition is on. If the anti-lock braking
system (ABS) is working properly, the
light goes out in a few seconds.
Thereafter, if the system fails, the
light lights up again until the fault is
cleared.
●
When the ABS fault warning light is on
(with the parking system fault warning
light o󽗈), the braking system continues
to operate whereas the ABS does not.
●
When the ABS fault warning light is on
(with the parking system fault warning
light o󽗈), since the anti-lock braking
system does not operate, the wheels
will be locked in case of emergency
braking or braking on a slippery road.
●
If any of the following cases occurs, it
means there is a fault in components
monitored by the warning light system.
In that case, contact a BYD authorized
dealer or service provider for vehicle
inspection as soon as possible.
●
This warning light does not come on
or is steady on when the ignition is
on.
●
This warning light turns on during
driving.
REMINDER
●
A warning light that lights up
brie󽗊y during operation does not
indicate a problem.
●
If the ABS fault warning light is
still on while the braking system
warning light is on, immediately
park the vehicle in a safe place.
It is recommended to contact a
BYD authorized dealer or service
provider. In this case, if brakes are
applied, the ABS will not work and
the vehicle will become extremely
unstable.
●
If bo
th the ABS indicator and braking
system warning lights go on after
the electronic parking brake (EPB)
is released, it indicates that the
electronic brake-force distribution
(EBD) system of the front and rear tires
has also failed.
Tire pressure fault warning light
●
This w
arning light comes on when the
ignition is on. It turns o󽗈 in a few
seconds if the tire pressure monitoring
system is working properly. If the
system fails, this warning light turns on
again.
●
When the tire pressure fault warning
light comes on or 󽗊ashes, the message
"Please check TPMS" is displayed
on the instrument cluster, and the
tire pressure is displayed as "---", it
indicates that the tire pressure system
is faulty.
●
When the tire pressure value displays
"No Signal", it indicates that the tire
pressure signal at this location may
be interfered or the tire pressure
monitoring module is damaged.
●
When the tire pressure fault warning
light 󽗊ashes rapidly and one or more
38