BYD SEAL 2023 - Charging Mode; General Charging Troubleshooting

voltage battery. To prevent insu󽗋cient
high-
voltage battery a󽗈ecting the vehicle
driving experience, it is very important to
charge the vehicle in time and estimate
the power demand before driving.
Vehicle Charging Method:
1. Using Mode 2 Charging Cable*
2. Using AC Charging Piles*
3. Using DC Charging Piles*
●
The charging time of high-voltage
varies with the charging mode, current
SOC, real-time temperature, service
time, ambient temperature and other
conditions.
●
U
se charging equipment that complies
with local standards.
Charging Mode
●
Charging Reservation (Only AC):
Charge the vehicle regularly at a
scheduled charging time set by the
user.
●
Immediate charging: Charging starts
after the charging connector is
connected.
General Charging Troubleshooting
Fault Possible Cause Solution
Charger is
c
onnected,
charge starts,
but battery is
not charged
The high-voltage
b
attery has been fully
charged
When the high-voltage battery is fully charged,
the char
ging will stop automatically.
High-voltage battery
t
emperature is too high
or too low
Keep the vehicle in an environment with
appr
opriate temperature and charge it when the
temperature becomes normal.
Low-voltage Battery
o
ver-discharging
Please replace the low-voltage battery.
Charging equipment
f
ailure
If it is v
eri󽗉ed that the charging equipment's
power indicator is working properly, or that
there are no other unusual indications, change
the charging equipment or contact the charging
equipment supplier.
Vehicle display fails
Verify that there is a charging system fault
messag
e on the instrument cluster, then stop the
charging. It is recommended to contact a BYD
authorized dealer or service provider.
Charging
s
tops midway
AC grid outage
During AC charging, if power supply resumes
aft
er short-time outage of the external power
grid, BYD charging equipment will re-start
charging automatically and no re-connection of
the charging equipment is required.
Charging cable is not
c
onnected properly
Verify that the charging connection cable is not
loosely connected.
79
04
USING AND DRIVING