●
Plug the char
ging connector into the
port and make sure it is tight.
●
Charging settings:
●
For AC charging pile/box subject to
authentication, swipe the card or
scan the QR code. See the user
manual for charging pile/box for
details.
●
The charging connection indicator
lights up on the instrument cluster.
●
In the char
ging process, the instrument
cluster displays relevant charging
parameters and the charging sign.
●
At this point, you can schedule
charging on the infotainment
touchscreen. See "Reservation
Charging" for the conguration
process.
3. Stopping charging
●
End the charging:
●
Charging ends automatically when
early stop time is due or charging is
complete.
●
Disconnect the charge port:
●
Disconnect as per the instructions for
mode 2 charging.
●
Close the charge port cap and the
port door (see "Using Mode 2 Charging
Cable").
●
Store the equipment properly.
●
If using an AC charging pile/box,
place the charging connector in its
designated location in the charging
pile/box.
Using DC Chargers*
1. Equipment descriptions
●
Use the DC battery charger in public
places to charge the vehicle. Generally,
it is installed in a specic char
ging
station.
●
Equipment specications: Please
check the instructions for the charger.
●
Charging time: Refer to the charging
time message on the instrument
cluster or infotainment touchscreen.
2. Charging
DC charging is achieved by connecting
the vehicle to a DC charging connector via
its connector.
●
Unlock the charge port door, then
open the port door and cap.
●
Connect the vehicle port:
●
Plug the connector into the port,
making sure it is tight.
●
Operate the charging equipment to
start charging.
●
The charging connection indicator
lights up on the instrument cluster.
●
In the char
ging process, the instrument
cluster or infotainment touchscreen
displays relevant charging parameters
and the charging sign.
3. Stopping charging
●
End the charging:
●
Charging ends automatically when
early stop time is due or the charging
is complete.
84
To Next Page
Loading...
