EasyManua.ls Logo

BYD SEAL 2023 - Usage Precautions

BYD SEAL 2023
211 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
between these modes automatically,
having no e󽗈ec
t on your use of the
vehicle.
To avoid low-voltage battery feed,
the smart charging function will be
actively triggered if conditions (hood
closed, ignition "OFF", high-voltage
battery discharging allowed, and low-
voltage battery level lower than the
design value) are met.
When the smart charging function
is triggered, the low-voltage battery
is charged through the high-voltage
battery. Therefore, it is normal that the
SOC or the pure-electric driving range
displayed on the cluster decreases,
when the vehicle is started after being
idle.
If "smart charging" fails, the low-
voltage battery may cut o󽗈 the
vehicle's power supply. If you 󽗉nd
before use that the vehicle is not
powered, try to activate the low-
voltage battery by pressing the driver
door microswitch continuously, and
immediately power on the vehicle to
charge the low-voltage battery. It is
recommended to charge it for more
than 1 hour.
CAUTION
The s
tarter iron battery contains
relays. Thus it is normal to hear a
"click" sound when the battery is
running.
The starter iron battery shall
be charged with professional
charging tools, and shall not be
removed for recharging without
permission.
Do not jump-start the vehicle with
another fuel vehicle, as this may
damage the starter iron battery.
The starter iron battery is a
battery on low-pressure platform
CAUTION
that is di󽗈er
ent from an ordinary
lead-acid battery. Please read the
instructions for use in this manual
in detail.
The starter iron battery has
a built-in power manager. Do
not disassemble or repair the
battery without permission to
avoid damaging the battery or
causing personal injury.
The starter iron battery needs to
communicate with the vehicle for
normal use, so it is important to
connect its connector and wiring
harness correctly.
Usage Precautions
Br
eak-in Period
If the powertrain is hard to start or
frequently stops turning, inspect the
vehicle immediately.
If the powertrain makes any abnormal
sounds, stop the vehicle for inspection.
If the powertrain has severe coolant
and oil leakage, stop the vehicle for
inspection.
The powertrain needs break-in. It is
recommended that this be done within
the 󽗉rst 2,000 km in economic mode
by smoothly driving, instead of high-
speed driving. The following practices
can e󽗈ectively prolong vehicle service
life:
Avoid 󽗊ooring the accelerator pedal
when starting and driving the
vehicle.
Do not maintain a high or low speed
for too long.
94

Table of Contents

Other manuals for BYD SEAL 2023

Related product manuals