EasyManua.ls Logo

BYD Seal 2024 - Starting and Driving; Starting the Vehicle

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
REMINDER
is no interference with the snow
chain.
When installing the snow chain,
park the vehicle on a flat surface
away from traffic, turn on the
hazard warning lights, and place a
warning triangle at the rear of the
vehicle.
Do not install snow chains with
low tire pressure.
When using tire chains, be careful
not to damage the aluminum
rims.
Starting and
Driving
Starting the Vehicle
Preparations before Driving
Check the surroundings before getting
into the vehicle.
Adjust seat position, seatback angle,
cushion height, headrest height, and
the steering wheel angle and height.
Adjust interior rearview mirror and
side mirrors.
Close all doors.
Fasten the seat belts.
Safety Check before Driving
It is advisable to carry out a safety
check before driving long distance, which
ensures your driving safety and enhances
your driving experience. The vehicle can
also be taken to a BYD authorized dealer
or service provider for inspection.
Exterior
Tires: Check tire pressure and
carefully inspect tires for any cut,
damage, foreign material, anomaly,
and excessive wear.
Lug nuts: Ensure all nuts are fitted and
tightened.
Lighting: Make sure headlights,
position lights, turn signals and all
other lights are working normally.
Check headlight intensity.
Interior
Seat belts: Check whether seat belts
can be properly fastened. Verify that
seat belts are not worn or scratched.
Instrument cluster: Particularly,
verify that maintenance indicator,
instrument cluster lighting, and
defroster work properly.
Brake pedal: Verify that there is
enough space for the brake pedal to
work.
Low-voltage battery and cables: Check
connectors for any corrosion or
looseness and any cracks in the low-
voltage housing under the left rear seat
cushion.
In the engine compartment
Spare fuses: Verify that spare fuses of
all rated charges in the fuse box are
available.
Coolant level: Verify that coolant level
is correct.
Check after starting
Instrument cluster: Confirm that
the maintenance indicator and the
speedometer work normally.
Brakes: In a safe area, drive the
vehicle straight, hold the steering
wheel tightly, decelerate and apply the
brake. Verify that the vehicle maintains
a straight direction.
106

Table of Contents

Related product manuals