Collision Warning(RCW), and Door
Open Warning(DOW). It detects
environment behind the vehicle
through radars installed on both sides
of the rear bumper so as to remind the
driver of safe driving.
Blind spot detection (BSD)
At vehicle speeds between 15-150 km/h,
if a rear corner mmWave radar detects
a vehicle in blind spots on an adjacent
lane or a vehicle approaching quickly on
the adjacent lane, the indicator on the
corresponding side mirror lights up. If the
turn signal for the same side is turned on
at this moment, the alarm indicator on
the side mirror flashes to alert the driver
of a risky lane change.
Rear Cross Traffic Alert (RCTA)
When the vehicle is reversing at a speed
no more than 15 km/h, the RCTA system
detects targets traveling in the side and
rear blind spots through rear corner
mmWave radars. If the system determines
that a target approaching from behind
the side of the vehicle poses a risk
of collision, the side mirror warning
indicators flash and an audible alarm is
given to alert the driver, reducing the
possibility of collision.
Rear Cross Traffic Braking (RCTB)
When the vehicle is reversing at a speed
no more than 9 km/h, the RCTB system
detects the vehicles traveling in the side
and rear blind spots through rear corner
mmWave radars. If the system determines
that a vehicle approaching from behind
the side of the vehicle poses a risk of
collision, it performs emergency braking
automatically.
Rear Collisions Warning (RCW)
At vehicle speeds between 5 km/h and
146 km/h, if the rear corner mmWave
radar detects a risk of collision with a
vehicle approaching quickly from behind
on the current lane, the hazard warning
light turns on to warn the driver in that
vehicle against a possible collision.
Door Open Warning (DOW)
DOW is realized with rear corner mmWave
radars installed on both sides of the rear
bumper. When the vehicle is stationary
with doors unlocked, the system keeps
indicators on side mirrors solid on to
warn the driver if moving objects, such as
bicycles or automobiles, approach from
behind on an adjacent lane. If the driver
attempts to open the door at this time,
indicators on side mirrors begin to flash
and a chime sounds.
Function Button Operation
●
To enable or disable BSD, RCTA, RCTB,
RCW and DOW, go to Infotainment
touchscreen
→ ADAS → Active
Safety → Blind Spot Assist. When the
vehicle is started, the system defaults
to previous settings.
●
When the blind spot assist system is
disabled, no relevant indicators are
displayed on the instrument cluster.
131
04
USING AND DRIVING
To Next Page
Loading...
