EasyManua.ls Logo

BYD Seal 2024 - Page 162

BYD Seal 2024
218 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
You can turn on multiple air
distribution modes at a time (up to
three).
Adjustments can be made according to
the following air supply.
Blowing face
: Air flows to the face
level.
Blowing legs
: Air flows to the leg
level.
Defrost
: Air flows to the front
windshield and side windows.
Intelligent A/C ON Method
Remote A/C ON with intelligent key
You can turn on the A/C through
the remote control key to gain a
comfortable interior environment in
advance.
Turning on A/C by voice
Control the A/C settings by the voice
button on the steering wheel or by
saying "Hi BYD".
Turning on A/C by cloud service
You can turn on the A/C through BYD
app interface to gain a comfortable
interior environment in advance.
Usage Precautions
To quickly cool down the interior after
long exposure to sunlight, drive for a
few minutes with the windows open
to exhaust hot air and speed up A/C
cooling.
Make sure that the air intake grille in
front of the windshield is not blocked
(for example, leafs or snow).
Avoid blowing cool air onto the
windshield in humid weather. The
inner and outer temperature difference
can cause glass fogging.
Keep the space under the front seats
clear to improve air circulation.
In cold weather, run the fan at high
speed for one minute to remove snow
or moisture from the intake passage
and reduce fogging.
In dusty or windy driving conditions,
close all windows, If the dust raised by
other vehicles still enters the vehicle
even if all windows are closed, it is
recommended to set the air intake
mode as recirculation mode and set
the blower speed at any position other
than "0".
To speed up cooling, adjust the
temperature to "Lo" and use the
recirculation mode for a few minutes.
Use recirculation mode for a few
minutes for quick heating in cold
weather, and switch to fresh air mode
to prevent fogging after cabin is heated
up.
In heating mode, press the compressor
control button to light up the button
(turning on the compressor), which
can reduce airflow moisture.
In the ventilation mode, the system
introduces the natural wind from
outside, which is suitable for spring
and autumn.
161
05
IN-VEHICLE DEVICES

Table of Contents

Related product manuals