BYD Seal 2024 - BYD App; Account Registration

●
Function: sterilization, air purification,
refreshing.
●
Tap the "ION" button on the A/C
or green air purification interface to
inactivate or activate the ION.
Outside PM2.5 value and level
●
Displays the PM2.5 value and level
outside the vehicle.
Inside PM2.5 value and level
●
Displays the PM2.5 value and level
inside the vehicle.
REMINDER
●
The PM2.5 value detected by the
on-board air purification (PM2.5)
detector is the PM2.5 value in
the air near the vehicle carrying
the device in a short time, which
should be different from the
daily or real-time PM2.5 value
declared by national and relevant
government authorities.
●
The frequency of PM2.5 detection
should be reduced in the
following environments:
●
Sandstorms and other such
extremely harsh environments.
●
Cold regions (with ambient
temperature below -20°C).
●
High humidity environments
(relative humidity >90%).
●
Environments with a change
in temperature (prone to
condensation), such as driving
in from a cold environment
to a high-temperature indoor
environment or parking lot.
●
Running maximum air flow speed
in recirculation mode can quickly
reduce the concentration of fine
particles in the air inside the
vehicle.
REMINDER
●
In order to reduce odors from
the A/C, if the A/C is already
turned on, the A/C blower may
keep running for a while after the
vehicle is powered off and locked.
That is because the condensed
water on the surface of the
evaporator needs to be dried to
prevent mold fermentation. It is
normal for the A/C blower to start
running automatically when you
lock the vehicle. No need to worry
about it.
BYD App
BYD App
●
BYD App is a mobile application of
Internet of Vehicle (IoV) developed by
BYD independently. It allows you to
control the vehicle remotely and check
vehicle conditions, delivering cloud era
experience of IoV.
●
You can search for "BYD" in application
markets such as Google Play and App
Store to download and install BYD app.
Account Registration
App guidance and the following steps
give instructions on signing up and
logging in after BYD app installation.
1. Open the app, then tap Sign up to go
to the registration screen.
2. Enter email address registered in BYD
authorized dealer, tap Send email to
receive verification code, and then
enter the code in app.
164