●
If necessary, adjust the front passenger
seat backwards so that there is no
contact between the child and vehicle
interior.
●
If necessary, the front passenger
seatback and seating height can be
adjusted so that it has secure contact
with the child restraint system.
●
For child restraint systems with the
guide fitting of belt attached to the
child seat headrest, ensure that the
guide fitting is positioned forward or in
line with the seat belt upper anchorage
on the vehicle's B-pillar.
●
When a forward-facing child restraint
system is used on the front passenger
seat, ensure that the seat is positioned
fully rearward away from the active
airbag.
●
Ensure that the seat belt passes
through the guide fitting without
kinking and is not bent over the edge
of the guide fitting.
Always follow the instructions below
when using a child restraint on a rear
seat:
●
If there is no front passenger, the front
passenger seat can be adjusted to
make sure there is enough space for
the rear child seat.
●
The head support can be adjusted
or even removed to ensure that the
vehicle seatback can safely support the
child restraint system.
●
When a child restraint is without
seatback, never remove the head
support from the vehicle and be sure
to adjust it to locking position.
●
When the top tether is used on a rear
outboard seat, route it at the outside of
each head support post.
●
For more installation instructions,
please read the instructions provided
with your child restraint system.
Details on child restraint system
installation:
① Driver seat
② Front passenger seat
③ Rear left seat
④ Rear center seat
⑤ Rear right seat
Seat belt, ISOFIX or i-Size CRS installing
options in the vehicle:
27
01
SAFETY
To Next Page
Loading...
